One stop for CNCs and automation

Posición actual:Página Principal > Horizontal Bed-type 3-axis > 900-1200
The Haiyu Optics, founded in 2000, is focus on design and manufactured fiber

The Haiyu Optics, founded in 2000, is focus on design and manufactured fiber

The Haiyu Optics, founded in 2000, is focus on design and manufactured fiber optic communication products. It has developed a range of products including Indoor and outdoor optical cables, fiber optic jumpers, pigtails, connectors and adapters, networkThe Haiyu Optics, founded in 2000, is focus on design and manufactured fiber optic communication products. It has developed a range of products including Indoor and outdoor optical cables, fiber optic jumpers, pigtails, connectors and adapters, networkThe Haiyu Optics, founded in 2000, is focus on design and manufactured fiber optic communication products. It has developed a range of products including Indoor and outdoor optical cables, fiber optic jumpers, pigtails, connectors and adapters, networkThe Haiyu Optics, founded in 2000, is focus on design and manufactured fiber optic communication products. It has developed a range of products including Indoor and outdoor optical cables, fiber optic jumpers, pigtails, connectors and adapters, network
The Haiyu Optics, founded in 2000, is focus on design and manufactured fiber Overview
  Single-mode Multimode
  PC UPC APC PC
Insertion Loss        
Return Loss        
Operating Wavelength        
Repeatability        
Working Temperature        
Service Life        
The Haiyu Optics, founded in 2000, is focus on design and manufactured fiber Specifications
The Haiyu Optics, founded in 2000, is focus on design and manufactured fiber - Compare:
VF-2YT   -   $59,995.00
行程 S.A.E. 公制
X 轴 30 "  762 mm
Y 轴 20 "  508 mm
Z 轴 20 "  508 mm
主轴鼻端到工作台(最大) 24 "  610 mm
主轴鼻端到工作台(最小) 4 "  102 mm
工作台 S.A.E. 公制
长度 36 "  914 mm
宽度 18 "  457 mm
T型槽宽度 5/8 "  16 mm
T型槽中心距 4.92 "  125.0 mm
标准t型槽数量 3   3
工作台最大承重(均匀分布) 3000 lb  1361 kg
主轴 S.A.E. 公制
最大功率 30 hp  22.4 kW
最大速度 8100 rpm  8100 rpm
最大扭矩 90 ft-lb @ 2000 rpm  122 Nm @ 2000 rpm
驱动系统 Inline Direct-Drive   Inline Direct-Drive
最大扭矩 – 选配齿轮箱 250 ft-lb @ 450 rpm  339 Nm @ 450 rpm
锥度 CT or BT 40   CT or BT 40
轴承润滑 Air/Oil Injection   Air/Oil Injection
冷却 Liquid Cooled   Liquid Cooled
进给率 S.A.E. 公制
快移速度 X 1000 in/min  25.4 m/min
快移速度 Y 1000 in/min  25.4 m/min
快移速度 Z 1000 in/min  25.4 m/min
最大切削 650 in/min  16.5 m/min
轴电机 S.A.E. 公制
最大推力 X 2550 lb  11343 N
最大推力 Y 2550 lb  11343 N
最大推力 Z 4200 lb  18683 N
换刀 S.A.E. 公制
类型 Carousel (SMTC Optional)   Carousel (SMTC Optional)
容量 20   20
最大刀具直径(装满) 3.5 "  89 mm
最大刀具重量 12 lb  5.4 kg
刀对刀(平均) 4.2  sec  4.2 sec
切削到切削(平均) 4.5  sec  4.5 sec
通用 S.A.E. 公制
气源要求 4 scfm, 100 psi  113 L/min, 6.9 bar
冷却液箱容量 55 gal  208 L